Drulov DU10

Product info "Drulov DU10"

Standard grip, according ISSF rules, stippled and oiled, for Drulov DU10.
With adjustable palm rest, moveable 5mm up and down from the middle position!

€224.13

Delivery time 12 weeks (made to order) plus transport time

Grip parameters

The necessary information for your grip are requested here:
If you are unsure about this, you can upload a outline sketch of your hand in the last step!

Side (required)

Right handed grip

Left handed grip

Form (required)

Convex form for normal hands,
flat form for short or strong hands.

As "normal" we call hands where the hand has the same width than the length of the middle finger.
E.g. a 95mm wide hand with a 90mm long middle finger, we would call "short"!

convex

flat

Angle (required)

0° lateral turning for a normal hand and head position so that the barrel axis points straight into the arm,

7° lateral turning for a cross-dominant target eye, short hands (better reachability of the trigger) or an inward pulling front sight (to the left for right-handers).

0°

7°

Volume (required)

Normal volume for normal hands,
thick volume (+5mm) for long hands.

As "long" we call hands where the middle finger is longer than the widht of the hand.
E.g. a 95mm wide hand with a 100mm long middle finger, we would call "long"!

normal

thick

Comments

Here you can enter comments about the order:

Hand sketch

If you are unsure about the selection of the grip parameters, you are welcome to upload a hand outline sketch with the order:

Please place your shooting hand on a sheet of paper, as shown on this sketch.
Draw with a thin ballpoint pen around the hand contour.
Make two reference lines, each 10cm long, horizontal and vertical on the sheet. The start and end points must be clearly visible!
Scan the sketch or photograph it vertically from above. The sides of the sheet must be parallel in the photo!

> More infos

Drag & drop files (JPG, GIF, PNG...) here (Max. 1 file(s), max. 10 MB per file)

%1

%2

Share your configuration

Product number: DU10

**Final prices may differ, due to possible recalculations in the shopping cart.

Accessories

Cocking lever grip, Feinwerkbau P8X

for Feinwerkbau P8X

€28.31

Details

Cocking lever grip, Steyr FP1

for Steyr FP1

€28.31

Details

Fore-end for TOZ35

for Baikal TOZ35, with rod and two weights.

€81.39

Details

Fore-end, Haemmerli FP150/ FP152

for Haemmerli FP150/ FP152, with rod and two weights.

€81.39

Details

Cocking lever grip, Steyr LP10, LP10e, EVO10, EVO10e

for Steyr LP10, LP10e, EVO10, EVO10e

€28.31

Details

Universal forend

Universal forend for the mounting at air cylinders, barrels and picatinny rails.Can be quickly and safely attached to various diameters with a screw clamp!Leather upholstery protects the surface!

€81.39

Details